Making The Connections - Panasonic SA-MAX4000 Bedienungsanleitung

MAX4000E.book Page 5 Tuesday, April 21, 2015 4:57 PM

Making the connections

Connect the AC mains lead only after all the other connections have been made.
1
Connect the AM loop antenna.
Stand the antenna up on its base until it clicks.
2
Connect the FM indoor antenna.
Put the antenna where reception is best.
Adhesive tape
(not supplied)
For the United Kingdom and Ireland
Connect the FM outdoor antenna.
Use an outdoor antenna if the reception is poor.
FM outdoor antenna
(not supplied)
75 Ω coaxial cable
(not supplied)
Antenna plug adaptor
Note:
• Do not use the outdoor antenna during a lightning storm.
•
Disconnect the outdoor antenna if you do not use the
system.
offset printing
3
Connect the speakers.
Connect the speaker cables to the terminals of the
same colour.
4
Connect the AC mains lead.
For the United Kingdom and Ireland
READ THE "Caution for AC mains lead" BEFORE
CONNECTION.
To household
mains socket
Do not use an AC mains lead from other equipment.
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
5
5