Recording; Basic Recording - Panasonic SA-MAX4000 Bedienungsanleitung

MAX4000E.book Page 12 Tuesday, April 21, 2015 4:57 PM

Recording

This system can record up to 800 folders (maximum 999
tracks in an album) or a total of 8000 tracks, depending
on the available storage capacity of the internal memory
or the USB device in
USB B
To check storage space
In the stop mode, press [DISPLAY].
• "UPDATE" is shown when the system is reading the
device.
• "NO DEVICE" is shown if there is no USB device
connected to .
USB B
Note:
•
All recordings are in ".mp3" format.
•
You cannot do recording when you are using random
playback mode.
• The DJ function is switched off during recording.
• Repeat playback mode is cancelled during recording.
•
A new album is added each time you do a recording.
•
The sequence of album may change after the recording.
•
The recordings are kept in a folder named "REC_DATA" in
the USB device or the internal memory.
• USB status indicator blinks in red during USB recording.

Basic recording

1
Select the source you want to record.
CD-DA
Prepare the disc playback mode.
Record all Select "OFF PLAYMODE"
tracks (Z"Play menu").
Record a Select "1-TRACK" (Z"Play menu").
specified
track
Make sure the disc is stopped.
Radio
Tune in to the radio station.
External equipment
Connect and play the equipment
(Z"External equipment").
2
Press [MEMORY REC 7/9] or [USB REC 7/9] to
start recording.
The name of the folder that keeps the recording is
shown.
Stop recording Press [8]. "WRITING" is shown.
Pause Press [MEMORY REC 7/9] or
recording [USB REC 7/9] during recording.
Press again to continue recording.
Note:
You can pause during recording from the
radio, AUX 1 or AUX 2 (except in
"SYNCHRO" mode). A track mark is
added every time you pause (Z"Adding
track marks").
Note:
•
Wait for a few seconds for the system to prepare the USB
device before you start recording.
•
When the next track of the disc is being recorded, it will be
shown on the display.
12
12
.
offset printing
█
High-speed recording
CD-DA disc recording speed:
CD, CD-R: Three times (3x) the normal speed.
CD-RW: Two times (2x) the normal speed.
1
Put in the disc you want to record.
2
Press [REC MODE] to select "NORMAL" or
"HI-SPEED" and then press [OK].
3
Press [USB REC 7/9] or [MEMORY REC 7/9] to
start recording.
Note:
•
If you cannot record at high-speed because of the
condition of the disc, record at normal speed.
• The sound is muted during high-speed recording.
█
Adding track marks
When recording from radio or external equipment, you
can divide tracks using various modes.
Before recording
Press [REC MODE] to select the mode.
MANUAL Add a track mark manually.
Press [OK] during recording to add a
track mark.
SYNCHRO Recording starts automatically when
(For AUX 1 or the other equipment starts to play.
AUX 2 source) Recording pauses when it detects
silence for 3 seconds.
TIME MARK A track is automatically divided at
5-minute intervals.
Note:
• During recording, if you press [OK] or pause recording
while using "TIME MARK" mode, the 5-minute counter is
reset.
• You cannot add track marks manually in "SYNCHRO"
mode.