SPORTSTECH F37 Benutzerhandbuch Seite 29

S2
S3
S2
STEP 1
Installing the upright frame
Upright and secure the upright frame into the stabilizer with Hex Bolt M8x50mm teeth 12mm (S2) and Hex
Bolt M8x16mm(S3) back sides.
Important: While assembly, it needs two persons to work together. One person holds the computer, and the
second tightens the bolts with the Allen Wrench (S1) provided.
EN
S3
S3
Abutting Joint
STEP 2
Installing the Computer
Connect the Signal Wire from the computer to the Signal Wire from the upright frame first . Then, secure the
computer into the upright frame with two Hex Bolt M8x16mm (S3) back sides. Tighten the bolts with the Allen
Wrench (S1) provided.
29