Operation; Cleaning And Servicing; Optional Accessories - Bosch MUZ5FW1 Serie Gebrauchsanleitung

MUZ5FW1.book Seite 27 Mittwoch, 20. August 2014 9:01 09

Operation


Thoroughly clean the mincer before using
for the first time, see "Cleaning and care".

Assemble mincer attachment in the indi-
cated sequence (Fig. ).
Do not fully tighten threaded ring.
Insert seal. Note position (Fig. )!

Fig. 

Press the Release button and move
the swivel arm to position 4.

Connect mincer to the drive.
Note position of the agitator with respect
to the drive. If required, turn the agitator
slightly. To do this, the threaded ring must
not be screwed tightly!

Turn mincer anti-clockwise.

Press down locking lever.

Now tighten the threaded ring.

Attach filling tray.

Place a bowl or plate under the outlet
opening.

Insert the mains plug.

Set rotary knob to setting 7.

Place the food to be processed in the filling
tray.
Use the pusher to push in ingredients.
t~êåáåÖ>
aç=åçí=éêçÅÉëë=ÄçåÉëK
Tip: Process steak tartare through the mincer
twice.
After using the appliance

Switch off the appliance with the rotary
switch.

Lift up locking lever.

Rotate the mincer in a clockwise direction
and remove.

Clean mincer.

Cleaning and servicing

^ííÉåíáçå>
aç=åçí=ìëÉ=~Äê~ëáîÉ=ÅäÉ~åáåÖ=~ÖÉåíëK=
pìêÑ~ÅÉë ã~ó=ÄÉ=Ç~ã~ÖÉÇK
jáåÅÉê=~åÇ=áåÇáîáÇì~ä=é~êíë=~êÉ=åçí=
ÇáëÜï~ëÜÉêJéêççÑK

Loosen threaded ring and disassemble
attachment.

Rinse individual parts by hand and
dry immediately.
Robert Bosch Hausgeräte GmbH

Optional accessories

(available from dealers)
t~êåáåÖ>
^äï~óë=~ëëÉãÄäÉ=íÜÉ=~ÅÅÉëëçêáÉë=ïáíÜçìí=
Ää~ÇÉë=~åÇ=éÉêÑçê~íÉÇ=ÇáëÅëK=
cçääçï=~ää=áåëíêìÅíáçåë=ãÉåíáçåÉÇ=~ÄçîÉ=
ÅçåÅÉêåáåÖ="cçê=óçìê=ë~ÑÉíóÒI="^ÑíÉê=ïçêâÒ=
çê "`äÉ~åáåÖ=~åÇ=ëÉêîáÅáåÖÒK
Fruit press attachment
for pressing e.g. berries, tomatoes, apples,
pears, rosehips (cook rosehips for 1 hour before
pressing). Extracted fruit pulp is especially
suitable for making jam.
Fig. 

Preparation as described for mincer attach-
ment. Note required individual parts and
sequence when assembling the fruit press
attachment.

First undo the fastening screw as far
as is required to allow the pulp to flow
out while still moist.

Then adjust the fastening screw until the
pulp flows out with the required moisture.

Place the food to be processed
in the filling tray.
Use the pusher to push in ingredients.

Set rotary knob to setting 7.
Viennese whirl attachment
for shaping biscuit dough or short pastry.
Fig. 

Preparation as described for mincer attach-
ment. Note required individual parts and
sequence when assembling the biscuit
attachment.

Place the dough to be processed
in the filling tray. Use the pusher to push
in ingredients.

Set rotary switch to setting 4 or 5 depending
on dough consistency.

Separate the shaped dough coming
out of the appliance with a pastry cutter.
Briefly switch off the food processor
if the dough comes out too quickly.
en
27