Intended Use; Operation - Bosch CleverMixx MFQ26-Serie Gebrauchsanleitung

en

Intended use

Intended use
This accessory is designed for the hand mixer MFQ2... .
Follow the operating instructions for the hand mixer.
Do not use the stand for other hand mixers.
When using the stand, only use the tools supplied with the
appliance.
This accessory is only suitable for kneading dough, whisking egg
whites and beating cream and light dough.
The accessory must not be used for processing other objects or
substances.
Safety instructions
W Risk of injury!
■ Before attaching or removing the hand mixer, wait until the drive
has come to a standstill and pull out the mains plug.
■ Whenever the swivel arm is lowered, do not reach into the
housing to avoid your fingers or hands getting caught. Do not
adjust the swivel arm while the appliance is switched on.
W Important!
It is essential to clean the accessory thoroughly after each use or
after it has not been used for an extended period. X "Care and
daily cleaning" see page 7
Overview
X Fig. A
1 Appliance stand with swivel arm
a Drive gear wheel
b Locking mechanism for hand mixer
c Lever for locking mechanism
d Opening for hand mixer
e Release button for swivel arm
f Base for bowl
g Bowl drive
2 Bowl
3 Hand mixer MFQ2...
a Opening for locking mechanism
b Base / holder
Tools
4 Turbo stirring whisks (x2)
a Worm drive gear
5 Kneading hooks (x2)
a Worm drive gear
6

Operation

For kneading dough, whisking egg whites
and beating cream and light dough.
Maximum processing quantity
X "Recipes" see page 7
1. Place the appliance stand on a smooth
and level work surface. Press the
release button and raise the swivel arm
to the stop.
2. Place the bowl on the base. The edge of
the bowl must completely cover the bowl
drive and the bowl should rotate easily.
3. Insert required tool pair (stirring whisks
or kneading hooks) into the hand mixer
and press into position.
Important! Only use tools that came with
the stand. Note the shape of the plastic
parts on the tools to avoid mixing them up.