Carson Reflex Wheel ultimate touch 2.0 Betriebsanleitung Seite 70

USB function:
Description:
• None: the USB interface can be used only to charge the battery
of the transmitter.
• FS-iT4-Emulator: when connected to a computer, the
transmitter acts as a standard HID with 4 axes (one for each
channel) and 3 switches (SW1, SW2 and SW3) and can be used
as the main controller in any compatible simulation software.
Operation:
1. Connect the transmitter to the computer by the Micro USB
cable.
2. Switch on the transmitter, then touch "system------" "USB
function------" "FS-iT4 simulator". After that, the computer will
automatic identify the HID.
3. In the computer control panel, double click „game controller"-
-------"FS-iT4 emulalor" to test whether the simulating function
is ok.
About FS-iT4:
Touch 'About FS-IT4', and the version of the current firmware will
be shown like the picture on the right. Touch the „OK" button to
go back.
GB // 70
Downloaded from www.Manualslib.com manuals search engine