Carson Reflex Wheel ultimate touch 2.0 Betriebsanleitung Seite 68

Reset odometer:
System
Backlight timeout:
GB // 68
Downloaded from www.Manualslib.com
Touch "Reset odometer 1" or
"Reset odometer 2" to reset the
corresponding odometer.
Odometer 1: it is used for
recording the distance traveled
by the vehicle one time
Odometer 2: it is used for
recording total distance traveled
by the vehicle.
The system menu sets various
system wide parameters.
set how much time the LCD
backlight will stay on if no key
is pressed and the screen is not
touched. The longer the LCD
backlight stays on, the shorter
the battery of the transmitter
lasts.
manuals search engine
Servo frequency selection:
Screen Calibration:
Touch the required frequency
to set a new servos frequency or
touch the back button to keep
the current servos frequency.
Sound: Turn on or turn off the
sound of the transmitter.
Auto power off: After five
minutes of no operation, the
transmitter will sound an alarm
and flash its LED. After five more
minutes of no operation, the
transmitter will automatically
shut down. Touch „Auto power
off" to cancel automatic power
off function.
This function can be used to
calibrate if touch sereen is not
accurate enough. Touch the
appearing cross center point
constantly to calibrate.