Carson Reflex Wheel ultimate touch 2.0 Betriebsanleitung Seite 53

Most of functions are set using a dialog bog. A dialog box contains
a set of different objects. Touching a button will execute or select
the function associated to it.
Reverse
The reverse function individually reverses the direction of operation
of the servos on Ihe 4 channels. This dialog box contains 4 big check
boxes, one for each channel. To toggle Ihe reverse state of a channel,
just touch It.
In this example, only the third channel is reversed, the other
channels operate normally.
Downloaded from www.Manualslib.com manuals search engine
This example contains the following objects:
• The value of the selected parameter is displayed in the value
box on the top of the dialog box.
• The 3 buttons "Forward", "Dead zone" and "Backward" select
the parameter to modify. To activate a button, simply touch it.
The selected option is highlighted in yellow.
• The wheel at the bottom allows to modify the value of the
selected parameter. To decrease the parameter value, touch
the wheel anywhere on the right and slide it to the left. To
increase the parameter value, touch the wheel anywhere on
the left and slide it to the right.
53 // GB