List Of Installer Menu; Parameters Adjustment - ECOFOREST ecoSMART e-manager Installerhandbuch

3.6.

List of installer menu

Follow the instructions below to browse through the various user menus. Each menu has a series of screens that are used to
change heat pump STATUS and OPERATION MODE, adjust comfort parameters and view desired information.
To access to the installer menu, you need to enter a 4-digit code. Simultaneously press the
password.
06/11/2016 F 1425
0.0kW 3.8 kW
1425
3.7.

Parameters adjustment

Take the following steps to change a parameter:
1. Search for the screen containing the parameter that needs adjusting (figure 3.4).
2. With the cursor in position 1 press on
3. Adjust the parameter in position 2 using buttons
4. Press to accept and move the cursor to position 3.
5. Adjust the parameter in position 3 with buttons
6. Press to accept and return to position 1.
7. With the cursor in position 1 again, press buttons
user menus.
ta pawo
t ta
pawo (PW1) 0000
ta mu 1/9
a.Chag aguag
b.Hat pump mo
c.GRD cocto typ
Figure 3.3. Browsing through the list of installer menus.
to enter the screen and move the cursor to the parameter in position 2.
.
Installer manual ecoSMART e-manager
XXXXXX
XXXXXX
XXXXXX
.
to go to the previous or next screen, or
41
key and to enter your installer
to return to the list of