Controller Guide; Control Panel - ECOFOREST ecoSMART e-manager Installerhandbuch

3. Controller guide

Depending on the software version and configuration established by the technical service, there may be screens or contents
thereof that are not shown.
NOTE
If the following screen appears when accessing menu, this means that the service requested has not been enabled by the
technical service.
3.1.

Control panel

The energy manager control panel has a screen with 6 buttons, like the one shown in the illustration below. The buttons are used
to move through the various user menus and to adjust the parameters.
The general functions of each of the buttons and operation is indicated below.
The ALARMS menu can be accessed directly from anywhere in the application.
The list of user menus can be accessed from anywhere in the application.
The user can return to the previous menu from anywhere in the application.
This allows the user to move through the menu lists.
This allows the user to move from one screen to another inside a menu.
This is used to adjust the settings of the parameters contained in a screen.
This allows the user to access the selected menu.
This is used to move from one adjustable parameter to another in the same screen.
This is used to access the INFORMATION menu directly from the main screen.
Installer manual ecoSMART e-manager
12.0C
26.0C
5h
Figure 3.1. Control panel.
37