Cleaning; Storage - Silvercrest SSM 350 A1 Bedienungsanleitung

Cleaning

WARNING – RISK OF ELECTRIC SHOCK!
► Always remove the plug from the mains power socket before cleaning the
appliance.
►
WARNING – RISK OF INJURY!
The blade 5 is extremely sharp! Handle it with great care at all times.
►
CAUTION – PROPERTY DAMAGE!
► Do not use aggressive, chemical or abrasive cleaning agents! They could
irreparably damage the surface!
NOTE
► We recommend that you clean the appliance immediately after using it to
prevent food residue from drying and becoming stuck.
1) Remove the power plug from the socket.
2) Remove the blender 4 from the motor unit 3. To do this, rotate the blender 4
towards the
3) Clean the motor unit 3 with a moist cloth.
Ensure that water does not enter the openings of the motor unit 3.
For stubborn dirt, add a little mild detergent to the cloth. Wipe off any
detergent residue with a damp cloth.
4) Thoroughly clean the blender 4 in soapy water, then rinse off the soap with
clear water.
NOTE
5) Dry everything thoroughly and ensure that the appliance is completely dry
before using it again.

Storage

1) Clean the appliance as described in the section "Cleaning".
2) Store the cleaned appliance in a clean, dust-free and dry location.
■ 44 │ GB │ MT
When cleaning, you must never immerse the motor unit 3 in water or
hold it under running water.
symbol and pull it off.
You can also clean the blender 4 in your dishwasher.
SSM 350 A1