Cleaning; Storage; Troubleshooting - Silvercrest SSMK 350 A1 Bedienungsanleitung

7. Cleaning

Clean the device prior to its first use!
DANGER! Risk of electric
shock!
Pull the mains plug 1 out of the wall
socket before you clean the device.
The motor unit 2, power cable and
mains plug 1 must not be immersed into
water or other liquids.
DANGER! Risk of injury from
cutting!
When washing manually, the water
should be sufficiently clear that you can
see the blade easily.
WARNING! Risk of material damage!
Do not use any astringent or abrasive
cleaning agents.
Wiping off
• Wipe off the motor unit 2 with a damp
cloth and, if necessary, some mild deter-
gent.
Dishwasher / Washing off
• The blender 3 can be ...
... cleaned in the dishwasher, or
... washed by hand in warm water with
detergent. Afterwards, rinse the
blender with clean water.
• Dry all parts carefully, before reassem-
bling the device and storing it.
Some cleaning tips
• Preferably clean the blender 3 immedi-
ately after use, to prevent food residues
from drying on and sticking to the hand
blender.
• After processing very salty foodstuffs,
the blender 3 should be rinsed immedi-
ately.
18 GB

8. Storage

DANGER for children!
Keep the device out of the reach of chil-
dren.
DANGER!
In order to avoid accidents, the mains
plug 1 must never be connected to a
wall socket while in storage.
• Select a location where neither high
temperatures nor moisture can affect the
device.

9. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Fault
• Has the device been
No function
• Check the connection.
• Switch off immediately,
Blade not
turning or
turning with
difficulty.
Possible causes /
Action
connected to the power
supply?
pull out mains plug 1
and check:
- Blockage in the bowl?
- Food too tough or too
hard?
- Device not assembled
correctly?