Herunterladen Inhalt Inhalt Diese Seite drucken

Shuffle Play; Time Display; Specifications - Teac PD-H500 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20

Shuffle Play

(You can use this function only with the
remote control unit.)
1. Press the shuffle button.
Tracks are played in random order.
2. Press the button again to cancel the
shuffle play function.
When this function is canceled, play will
continue from the subsequent track in
normal order.
Notes
1. This function operates even in the stop
mode or during play.
2. If you press the Æ button during
shuffle play, you can select tracks at
random irrespective of the current track
number. And if you press the Ú
button, play will start from the beginning
of the current track.
3. A once selected or played track will not
be played any more.

Time Display

(You can use this function only with the the
remote control unit.)
States of the display
This unit can display four types of time
mode on the time counter in the display.
1. The elapsed time of the current track is
displayed when playback begins.
2. Press the time button once during play.
Then, the remaining time of the current
track will be displayed.
3. Press the time button again.
Then, the total elapsed time of the disc
will be displayed.
4. Press the time button once more.
Then, the total remaining time of the disc
will be displayed.
Notes
1. Time will not be displayed during the
programmed play if the programmed
contents exceed 100 minutes. At this
time, "--.--" will be shown instead.
2. If you press the time button in the stop
mode, the total track number and the
total playing time on a disc will be
displayed.
3. When track 33 or more is played, the
remaining time will not be displayed.
_ 10 _

Specifications

Laser System : 3-beam laser
Digital Filter : 8-times oversampling
Frequency Response : 20-20,000 Hz (±2 dB)
Error Correction Method :
Cross Interleave Reed-Solomon
code
S/N Ratio :
More than 100 dB (IHF "A" filter
used)
THD : Less than 0.02% (1 kHz)
Output Voltage : 2 V rms
Power Source : 230 VAC, 50 Hz
Power Consumption : 9 W
Dimensions (WxHxD) : 285 x 132 x 292 mm
Weight: : 3.9 kg
Accessories:
Signal input/output cord
Remote control cord
OImprovements may result in specifi-
cation or feature changes without
notice.
OPhotos and illustrations may differ
slightly from production models.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis