Configuration Via Operating Keys - Endress+Hauser RIA16 Kurzanleitung

RIA16
 8
1
1a
1b
2
6.2
The device must be configured outside the hazardous area.
 9
To configure the device, open the housing cover. The keys (+, -, E) can now be accessed.
During configuration, the display must be connected to the electronics unit.
6.2.1
The operating fields are split into 2 levels.
Menu: Various menu items can be selected on the menu level. The individual menu items are
an aggregation of the associated operating functions.
Operating function: An operating function can be regarded as an aggregation of the
operating parameters. The operating functions are used to operate and configure the device.
Endress+Hauser
Downloaded from www.Manualslib.com
1
1a
2
6
LC display of the field indicator
Bargraph display
Indicator for measuring range undershoot
Indicator for measuring range overshoot
Measured value display
Digit height 26 mm (1.02 in)

Configuration via operating keys

Operating keys of field indicator ("-", "+", "E")
Navigation
manuals search engine
1b
5
4
3
3 14-segment display for units and messages
4 Symbol 'Programming disabled'
5 Unit '%'
6 ' F ault' indicator
Operating the field indicator
A0011163
A0011261
31