Safety instructions
1.1.4
Tool symbols
Symbol
Meaning
Flat blade screwdriver
A0011220
Allen key
A0011221
Open-ended wrench
A0011222
Torx screwdriver
A0013442
1.2
Registered trademarks
HART
®
Registered trademark of the HART Communication Foundation, Austin, U.S.A.
Applicator
®
, FieldCare
Registered trademarks or trademarks of companys of the Endress+Hauser group
2
Safety instructions
2.1
Requirements for the personnel
The personnel must fulfill the following requirements for its tasks:
‣
Trained, qualified specialists must have a relevant qualification for this specific function
and task
‣
Are authorized by the plant owner/operator
‣
Are familiar with federal/national regulations
‣
Before beginning work, the specialist staff must have read and understood the instructions
in the Operating Instructions and supplementary documentation as well as in the
certificates (depending on the application)
‣
Following instructions and basic conditions
2.2
Designated use
• The device is a configurable field indicator with one sensor input.
• The device is designed for installation in the field.
• The manufacturer does not accept liability for damage caused by improper or non-
designated use.
• Safe operation is only guaranteed if the Operating Instructions are observed and adhered to.
• Only operate the device in the permitted temperature range.
22
Downloaded from
www.Manualslib.com
®
, Field Xpert
TM
, HistoROM
manuals search engine
®
RIA16
Endress+Hauser