Installation
4.2.1
Dimensions
2
Installation dimensions; dimensions in mm (in)
1
Bore hole for mounting to wall or optional mounting plate with 4 srews ⌀ 5 mm (0.2 in)
4.2.2
Installation location
Information on conditions that must be present at the installation location to mount the
device correctly can be found in Section ' T echnical data' →
ambient temperature, degree of protection, climate class etc.
4.3
Mounting instructions
The device can be mounted directly on the wall or the optional mounting plate can be used for
wall or pipe mounting (→ 26).
4.3.1
Direct wall mounting
Proceed as follows to mount the device directly on the wall:
1.
Drill 4 holes (see Dimensions, → 2, 26)
2.
Attach the device to the wall with 4 screws 5 mm (0.2 in).
4.3.2
Pipe mounting
The mounting bracket is suited for pipes with a diameter between 25 to 125 mm (1 to 5 in).
The mounting kit consists of a mounting plate (item 1), 2 clamps (item 2) and 4 screws (item
3), → 3, 27.
To install the field indicator on a pipe, proceed as follows:
26
Downloaded from
www.Manualslib.com
199 (7.83)
manuals search engine
96 (3.78)
A-A
A
A
BA00280R. These include the
RIA16
1
163 (6.42)
A0011162
Endress+Hauser