Maintenance - Siemens SITRANS L 260 Schnellstartanleitung

• Launch SIMATIC PDM – Manager Device Catalog, browse to the unzipped EDD file and
Configuring a new device
1.
2.
3.
Quick Start Wizard via SIMATIC PDM
Notes:
• The Quick Start wizard settings are inter-related and changes apply only after you click on
Transfer at the end of step 4.
• Click on BACK to return and revise a setting or Cancel to exit the Quick Start.
Launch SIMATIC PDM, open the menu Device – Quick Start, and follow steps 1 to 4.
Note
Wizard. See full Operating Instructions for details.

Maintenance

SITRANS LR260 requires no maintenance or cleaning under normal operating conditions. If
cleaning becomes necessary under severe operating conditions:
1.
2.
Unit Repair and Excluded Liability
For detailed information, please see the inside back cover.
Page EN-18
Downloaded from www.Manualslib.com
select it.
Launch SIMATIC PDM and create a new project for LR260. Application Guides for setting
up PROFIBUS PA devices with SIMATIC PDM can be downloaded from the product page
of our website at: www.siemens.com/LR260.
Upload parameters to the PC/PG.
Configure the device via the Quick Start wizard.
: For liquid applications, some parameters must be modified following the Quick Start
Note the antenna material and the process medium, and select a cleaning solution that
will not react adversely with either.
Remove the device from service and wipe the antenna clean using a cloth and suitable
cleaning solution.
SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL
manuals search engine
Quick
Start
A5E32114443