Siemens SITRANS L 260 Schnellstartanleitung Seite 18

1.1. Application Type
Options
1.2. Response Rate
Sets the reaction speed of the device to measurement changes in the target range.
Options
Use a setting just faster than the maximum filling or emptying rate (whichever is greater).
1.3. Sensor Units (UNITS)
Selects the units for the Quick Start variables (high and low calibration point, and level,
distance, or space).
Options
1.4. Operation
Operation
types
Page EN-16
Downloaded from www.Manualslib.com
STEEL (Default)
CONCRETE
SLOW
MED
FAST
M, CM, MM, FT, IN
sensor reference point
low cal.point
NO The SITRANS LR260 stops updating measurements. Last valid
SERVICE measurement is displayed.
Distance to material surface referenced from Low Calibration
LEVEL
Point (process empty level).
Distance to material surface referenced from High Calibration
SPACE
Point (process full level).
Distance to material surface referenced from Sensor Reference
DISTANCE
Point.
Default: Distance
SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL
manuals search engine
0.1 m/minute
1.0 m/minute
10.0 m/minute
high cal.
point
distance
space
level
A5E32114443