Maintenance - Siemens SITRANS LC300 Kurzanleitung

LC300 Menu Functions
Use the rotary switch and the push-buttons to set the display and programming values for your
application.

Maintenance

SITRANS LC300 requires no maintenance or cleaning under normal operating conditions. Even
with significant build-up on the SITRANS LC300 probe, the level controller will continue to
operate.
Note:
performance of the SITRANS LC300.
Unit Repair and Excluded Liability
For detailed information, please see the inside back cover.
Page EN-10
Downloaded from www.Manualslib.com
Rotary
Switch 
0
Position
Read PV Read LRV (pF)
Display
(pF) (0% level)
Up button
Increase LRV
Down 
Decrease LRV
button
Both 
Set LRV from PV Set URV from PV
buttons
Build-up of material on the active shield area has little or no effect on the
SITRANS LC300 – QUICK START MANUAL
manuals search engine
1 2
Read URV (pF) Read mA loop-
(100% level) current
Set fault protection
Increase URV
setting to 22 mA
Set fault protection
Decrease URV
setting to 3.6 mA
Disable fault
protection
3 4 5
Diagnostics Damping
Product 
Increase
Version Damping
Decrease
Damping
Reset/
Set Damping
Acknowledge
to 1.00
Fault
A5E32268590