Siemens SITRANS L 260 Schnellstartanleitung Seite 12

Programming SITRANS LR260
A Quick Start Wizard provides an easy step-by-step guide to help you configure the device for
a simple application.
• 7-step
• 4-step
Settings can be modified locally via the Local User Interface (see
the handheld programmer
Interface (LUI) consists of an LCD display and a handheld programmer.
Activating SITRANS LR260
Power up the device. SITRANS LR260 automatically starts up in Measurement mode. Press
Mode
The LCD Display
Measurement mode
1
Fault present
1.
In response to a key press request. For details, see
Page EN-10
Downloaded from www.Manualslib.com
Quick Start Wizard via the handheld programmer
Quick Start Wizard via SIMATIC PDM
on page 12) or remotely via SIMATIC PDM. The Local User
to toggle between Measurement and Program Mode.
1
(normal operation)
(((
2 3 4
6
8 7
7 – text area displays a fault code and an error message
S: 0 LOE
8 – service required icon appears
SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL
manuals search engine
on page 18.
1 – toggle indicator for AIFB 1 or AIFB 2
2 – identifies which AIFB is source of displayed value
3 – measured value (level, space, distance, or volume)
4 – units
5 – bar graph indicates level
6 – secondary region indicates on request
temperature, echo confidence, or distance
7 – text area displays status messages
8 – device status indicator
5
Handheld Programmer
on page 15.
Accessing parameters via
1
electronics
on page 12.
A5E32114443