Initial Calibration; Operation - OHAUS Scout SJX Serie Bedienungsanleitung

EN-4

2.5 Initial Calibration

When the Balance is first installed, and when it is moved to another location, it must be
calibrated to ensure accurate weighing results.
For SJX/E models, the balances must be calibrated by using the external calibration weights.
For SJX models, the balances have built in internal calibration system which can calibrate the
balance without the need for external calibration masses. Alternately, the SJX balances can be
manually calibrated with external masses.
Have the appropriate calibration masses available before beginning calibration. Refer to the
Calibration Section for masses and calibration procedure.

3. OPERATION

3.1 Controls
Button
Primary Function
(Short Press)
Secondary Function
(Long Press)
(Extended Press)
Menu Function
(Short Press)
1.800.561.8187
Figure 3-1. Scout Control Panel
TABLE 3-1. Button Functions
Zero/On
Turns the balance Sends the current
on value to the selected
COM ports if
AUTOPRINT is set
If balance is On,
to Off.
sets Zero
Zero/Off
Turns the balance Changes the
Off. weighing unit.
None None
Yes
Accepts the current Advances to the next
setting on the menu or menu item.
display.
Rejects the current
setting on the
display and
advances to the next
available setting.
www.
TM
SCOUT
Print Function
Initiates an
application
mode.
Units
Allows changing
the application
mode.
None
No
Moves Back to
previous menu
item.
information@itm.com
.com
SJX SERIES BALANCES
Tare
Enter/clear a
tare value.
Mode Menu
Enter the
User menu.
View the
preset Tare
value
Back Exit
Exits the
User menu.
Aborts the
calibration in
progress.