Disassembling The Device; Packaging The Device; Storing The Device; Disposal - Kaco blueplanet 3.0 TL3 Bedienungsanleitung

» The device is uninstalled. Proceed with disassembly.
9.3

Disassembling the device

↻ Unit has been switched off and uninstalled.
1 Remove the screw that prevents the device from being lifted off the mount.
2 Use the lateral openings and lift the device off the mount.
» Device removed. Proceed with the packaging process.
9.4

Packaging the device

↻ Device has been uninstalled.
1 If possible, always pack the device in the original packaging. If this is no longer available, an alternative is to use equi-
valent packaging.
2 You must be able to close the box completely and it must be able to accommodate the weight and size of the device.
9.5

Storing the device

CAUTION
Property damage as a result of condensation
Faulty storage can form condensate in the device and impair the device functioning (e.g. storage outside
the ambient conditions or temporary relocation from a cold to a hot environment).
ü Store in accordance with the technical data > Environmental data [See section 4.3} Page 12]
› Prior to installation, check the inner area for condensation and if necessary, allow it to dry sufficiently
before installation.
↻ Device packaged.
F Store the device at a dry location, in accordance with the ambient temperature range Environmental data [See sec-
tion 4.3} Page 12].
10

Disposal

CAUTION
Risk to the environment if disposal is not carried out in the correct manner
For the most part, both the device and the corresponding transport packaging are made from recyclable
raw materials.
Unit: Do not dispose of faulty devices or accessories together with household waste. Ensure that the old
devices and any accessories are disposed of in a proper manner.
Packaging: Ensure that the transport packaging is disposed of properly.
11

Service and warranty

If you need help solving a technical problem with one of our KACO products, please contact our service hotline.
Please have the following information ready so that we can help you quickly and efficiently:
ž Device name / serial number
ž Date of installation / Start-up report
ž Fault message shown on the display / Description of the fault / Did you notice anything unusual? / What has already
been done to analyse the fault?
ž Module type and string circuit
ž Consignment identification / Delivery address / Contact person (with telephone number)
ž Information about the accessibility of the installation site.
KACO blueplanet 3.0 TL3 KACO blueplanet 4.0 TL3 KACO blueplanet 5.0 TL3 KACO blueplanet 6.5 TL3 KACO
blueplanet 7.5 TL3 KACO blueplanet 8.6 TL3 KACO blueplanet 9.0 TL3 KACO blueplanet 10.0 TL3
Page 29