Installing And Securing The Device - Kaco blueplanet 3.0 TL3 Bedienungsanleitung

C
B
A
D
B
C
Fig. 7: Minimum clearances for wall mounting
Key
1 Mount
2 Fixings for mounting [S6 – Ø 6mm/ 50mm]
3 Screws for mounting 5x 5x50 [Z2+Slot 5x50 Fastening
the mount [See section 6.3} Page 15]]
A Minimum clearance: 150 mm (without device304.5
mm )
recommended distance475 mm (without device 510
mm *)
B Minimum clearance: 500 mm
↻ Cardboard packaging with mount and mounting kit removed from the packaging and opened.
1 Mark the mounting position on the wall surface according to the position of the mount by drawing a line.
2 Mark the positions of the drill holes using the slot in the mount.
NOTE: The minimum clearances between two devices, or the device and the ceiling or floor have already been
taken into account in the diagram.
3 Fix the mount to the wall using suitable mounting fixtures from the mounting kit.
NOTE: Make sure that the mount is oriented correctly.
» Proceed with the installation of the device.
6.4

Installing and securing the device

CAUTION
Risk of injury from improper lifting and transport.
If the device is lifted improperly, it can tilt and result in a fall.
› Always lift the device vertically using the openings provided.
› Use a climbing aid for the chosen installation height.
› Wear protective gloves and safety shoes when lifting and lowering the device.
Page 16
5
50 mm
1
2
4
3
A
KACO blueplanet 3.0 TL3 KACO blueplanet 4.0 TL3 KACO blueplanet 5.0 TL3 KACO blueplanet 6.5 TL3 KACO
blueplanet 7.5 TL3 KACO blueplanet 8.6 TL3 KACO blueplanet 9.0 TL3 KACO blueplanet 10.0 TL3
510 mm
1220 mm
160 mm
180 mm
920 mm
Fig. 8: Wall mounting
4 Bracket with detachment protector
5 Screw for securing purposes (1x)
C Minimum clearance: 700 mm
D Recommended clearance: 250 mm
582 mm
216 mm