Introduction; Features Of The Ims 100 Pro; Ims 100 Pro-L; Delivery Package - Cedes IMS 100 Pro Handbuch

IMS 100 Pro
4.

Introduction

The IMS 100 Pro sensor is used to enhance elevator
door protection systems by providing sensor detection
in front of the elevator cab entrance. It is used with
existing two-dimensional (2D) elevator door protection
systems such as light curtains or mechanical edges
to provide three-dimensional
IMS 100 Pro can be used for new elevator installations or
for modernization of existing elevator systems.
As an extension to existing door-protection devices,
the purpose of the IMS 100 Pro sensor is to monitor the
entrance area of the elevator door for people or objects
entering the elevator cab. By using "Time of Flight"
(TOF) technology, the IMS 100 Pro sensor can detect
the difference between a person or object approaching
the elevator cab and a stationary person or object in the
elevator cab entrance area. The sensor's compact, housing
is optimized for difficult mounting locations, including
narrow elevator cab transoms.
When the elevator cab door opens, the IMS 100 Pro quickly
acquires a reference image of the elevator cab entrance
area. This reference image is then compared to the
sensor's current image. The IMS 100 Pro behaves similarly
to other door protection systems (e.g. light curtains). When
the sensor is clear of moving person(s) or object(s), the
semiconductor-based output will be active (HIGH, e.g. 24
VDC). When a moving person or object is detected within
the sensor's field of view (approximately 900 mm wide
by 200 mm depth at 2 m distance from the sensor), the
semiconductor output will transition to inactive (LOW, e.g.
0 VDC). The IMS 100 Pro can also be configured so that
the semiconductor output will automatically transition to
active (HIGH, e.g. 24 VDC for a period of 7 s) after a fixed
18-second timer has expired (e.g. for nudging, see Chapter
6.3).
Figure 1:
IMS 100 Pro - corner-mounted for side-opening doors
4
(3D) protection. The
4.1

Features of the IMS 100 Pro

• Prevents accidents
• Prevents damage to elevator doors
• Offers double safeguarding when combined with light
curtain
• No need to configure the monitored area
• Automatic door recognition using TOF technology
• Extremely reliable object detection using TOF
technology
• Ideal for both new facilities and modernization
• Entrance area monitoring reduces door-opening time
• Suitable for center and side opening
4.2

IMS 100 Pro-L

In general the IMS 100 Pro can be installed left, center and
right of the door opening. The IMS 100 Pro works reliable
for most of the applications. However, for some very seldom
use cases of very shiny and slow moving elevators doors a
special configuration of the IMS 100 Pro should be used for
right opening doors (mounting left side of the transom; see
Figure 3, 11 and 12). This special configuration is called
IMS 100 Pro-L. The dimensions and the installation of an
IMS 100 Pro-L are equal to those of a IMS 100 Pro.
4.3

Delivery package

The IMS 100 Pro system consists of the following
components:
• 1 × IMS 100 Pro (preassembled)
• 1 × Mounting box IMS 100 Pro, surface mounting
• 1 × Flush mounting plate
• 1 × 5 degree mounting bracket
• 1 × Connection cable (2.8 m / 9.19 ft)
• 1 × IMS 100 Pro accessories kit
• 1 × Installation guide
• 1 × Drilling template
• 1 × Power Line Converter 85 ...265 VAC (depending
on the ordered kit)
Important:
Integrating the CEDES IMS 100 Pro sensor into a new or
existing door protection system can be accomplished in
several ways depending on the elevator control system
requirements. The following sections provide examples for
incorporating the IMS 100 Pro into an existing system. The
contents of each delivery depend on the system ordered.
Should you have any queries regarding the contents of this
delivery, or if you require application assistance, please
contact CEDES or your local distributor.
English
© CEDES | V 4.0