Electrical Connection (Uk Only) - DeLonghi BG20 Gebrauchsanleitung

BG20/21 25-02-2002 15:35

ELECTRICAL CONNECTION (UK ONLY)

A) If your appliance comes fitted with a plug, it
will incorporate a 13 Amp fuse. If it does not
fit your socket, the plug should be cut off
from the mains lead, and an appropriate
plug fitted, as below.
WARNING: Very carefully dispose of the cut
off plug after removing the fuse: do not insert
in a 13 Amp socket elsewhere in the house
as this could cause a shock hazard.
With alternative plugs not incorporating a
fuse, the circuit must be protected by a 15
Amp fuse.
WARNING - THIS APPLIANCE MUST BE
EARTHED
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
Pagina 11
If the plug is a moulded-on type, the fuse
cover must be re-fitted when changing the
fuse using a 13 Amp Asta approved fuse to
BS 1362. In the event of losing the fuse
cover, the plug must NOT be used until a
replacement fuse cover can be obtained
from your nearest electrical dealer. The
colour of the correct replacement fuse cover
is that as marked on the base of the plug.
B) If your appliance is not fitted with a plug,
please follow the instructions provided
below:
As the colours of the wires in the mains lead may
not correspond with the coloured markings
identifying the terminals in your plug, proceed as
follows:
The green and yellow wire must be connected to
the terminal in the plug marked with the letter E or
the earth symbol or coloured green or green
and yellow.
The blue wire must be connected to the terminal
marked with the letter N or coloured black.
The brown wire must be connected to the terminal
marked with the letter L or coloured red.
11