Massoth eMOTION Konfigurationsanleitung Seite 33

Attachment 2: CV 49 - MASSOTH configuration table
Bit Value
0 1
1 2
2 4
3 8
4 16
Attachment 3: CV 51, 52, 54, 56, 113, 115, 117, 119 - Switch. output commands
Value
0 - 16
+ 64
+ 128
Attachment 4: CV 53, 112 - Dimming values
Value
1 - 32
+ 64
+ 128
+ 192
Downloaded from www.Manualslib.com
OFF (Value=0)
Parallel data transfer only
Digital load control = OFF
Analog load control = OFF
A1-Output standard function Fast pulse string (P-Update)
Massoth bus
Application
0 = Switch function with light key,
1 ... 16 = Switch function with F-key No. 1-16
Switching Output „on" in Reverse Only
Switching Output „on" in Forward Only
Application
Voltage in percent of track voltage on output
A1 resp. A3 is dimmed only
A2 resp. A4 is dimmed only
Both outputs will be dimmed
manuals search engine
ON
Serial + parallel data transfer automatic detection
Digital load control = ON
Analog load control = ON
on A1
SUSI bus
Note
additional value must be added
additional value must be added
Note
1 unit = approx. 3% of track
voltage (0,75V)
1 = 3% of track voltage (0,75V)
32 = 100% track voltage (24V)
A1 = value in CV53
A3 = value in CV112
additional value must be added
A2 = value in CV53
A4 = value in CV112
additional value must be added
additional value must be added
Note
of seriell/parallel
Bit 3 „on" only with
bit 0 = „on"
33