Herunterladen Inhalt Inhalt Diese Seite drucken

D) Measurement; E) Storage And Recall; Unit Change; Switch Off - VOLTCRAFT NTU-600 Bedienungsanleitung

Trübungsmessgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

d) Measurement

1. Before taking sample measurement, see "Notes for an accurate measurement" on preparing
a glass bottle and sample.
2. 10 ml sample is required for accurate measurements. Use the supplied measuring cup to
take 10 ml sample, then fill the supplied testing bottle with 10 ml sample from the measuring
cup.
3. Tighten the cap onto the testing bottle, and place it into the sample holder of the instrument.
Then close the cap of the sample holder securely by aligning the notch on the cap with the
arrow marked next to the cap.
4. Press the
initialize measurement. "
5. Wait around 10 seconds for the measurement completion. The turbidity reading is displayed.
If the measured turbidity is over 1000 NTU, "HI" is displayed instead.

e) Storage and recall

To store a turbidity reading, press the
the display. "STORE" (D) and a sequence number (B) for storage is displayed briefly. Up to
150 turbidity readings can be saved.
To recall the stored turbidity readings, press and hold the
to enter the recall mode. "RECALL" (C) is displayed. Then press the
button to browse the stored turbidity readings.
To exit the recall mode, press and hold the
disappears on the display.
To delete all the stored turbidity readings, in the recall mode hold down the
buttons simultaneously for three seconds. "CLR" is displayed briefly.
f) Unit change
In the measurement mode, press and hold the
unit icon (A) flashes on the display. Then press the
(NTU, FTU and EBC), and press the
g) Switch off
The instrument switches off automatically if there are 10 minutes of inactivity.
You can also press the
button to turn the instrument on. Then press the
" flashes on the display when measuring.
/
button to switch off the instrument.
button when a turbidity reading is obtained on
button (7) for three seconds
button for three seconds. "RECALL"
button for three seconds until the
or
button to confirm.
button to
or
and
button to select a unit
27

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis