Werbung
Any damage incurred through mishandling of the product or not
adhering to the instructions will render the guarantee invalid! We
shall not be held liable for any consequential damage or loss!
We shall not accept liability for damage to property or personal
injury caused by incorrect handling or non-compliance with the
safety instructions. In such cases the guarantee will lapse.
This appliance left the factory in perfect technical condition and in a
totally safe working order.
To maintain this status and ensure safe operation, you, as the user,
must comply with the safety instructions and warnings contained in
these instructions for use. The following symbols and notices must
be observed:
Note! Read the operating instructions!
An exclamation mark in a triangle indicates important
information in these operating instructions which must
be observed without fail.
This equipment is CE-tested and thus meets the EMC
directive 89/336/EEC and the low-voltage directive
73/23/EEC.
For safety and licensing reasons (CE), unauthorised conversion
and/or modification of the device is not permitted.
Measuring instruments and accessories are not toys and have no
place in the hands of children!
For use in commercial areas the relevant accident prevention rules
for the trade association in charge of electrical appliances should be
adhered to.
18
Measurement tolerances
Statement of accuracy in ± (% of reading (= reading = rdg) + display
error in digits (= dgt = no. of the smallest points)). The accuracy is
valid for 1 year at a temperature of +23°C +/5°C, and at a relative
humidity of less than 80 %, non-condensing.
Measuring
Measurement
unit
range
m/s
0.4 ~ 25.0 m/s
km/h
1.4 ~ 90.0 km/h
mph
0.9 ~ 55.9 mph
knots
0.8 ~ 48.8 knots
ft/min
80 ~ 4930 ft/min
°C
0°C ~ 50°C
°F
32°F ~ 122°F
Accuracy
Resolution
+/-(2%+1dgt)
0.1 m/s
+/-(2%+1dgt)
0.1 km/h
+/-(2%+1dgt)
0.1 mph
+/-(2%+1dgt)
0.1 knots
+/-(2%+20ft/min)
1 ft/min
+/-0.8°C
0.1°C
+/-1.5°F
0.1°F
27
Werbung
Kapitel
