Storage - Silvercrest SRR 3.7 C4 Bedienungsanleitung

6) To reattach, simply turn the lock marked with arrows in the opposite
GB
direction of the arrows so that the mounting of the cutters cannot
CY
be lifted off.
7) Remove loose hairs from the shaver with the brush
8) Replace the cutting unit
into place and is seated firmly.
■ Clean the housing and the mains adapter
NOTE
If...
–
–
–
–
... you must change the cutters.
Please contact Customer Services if you want to order cutters.

Storage

■ Always replace the protective cap
when you are not using the appliance.
■ Store the everything in a clean, dust-free and dry place.
18
... the shaving result is noticeably poorer, ...
... you have to the shave the same spot repeatedly to
achieve a good result, ...
... the shave takes much longer than usual, ...
... there is visible damage to the shaving heads, ...
on the shaver. Ensure that it snaps
onto the cutting unit
.
with a moist cloth.
SRR 3.7 C4