Silvercrest SBT 1.5 B1 Bedienungsanleitung Seite 14

1) Remove the shaving head
and cleaning the shaving head".
2) Press the parts of the cutting head out towards the open side of
the shaving head housing
3) Clean the individual parts carefully under running water.
4) Leave the parts to dry thoroughly.
5) To re-assemble, insert the cutting head cover
head housing
cover
cover
SBT 1.5 B1
Downloaded from www.Manualslib.com
so that the indentations on the cutting head
slide into the catches on the inside of the cutting head
(see fig. 1).
Fig. 1
manuals search engine
as described in the section "Removing
.
GB │ IE │ NI
into the shaving
│
11 ■