Cleaning All Parts Of The Device; Storage - Silvercrest SSMP 2000 A1 Bedienungsanleitung

BB&3(B%ERRN 6HLWH  0LWWZRFK  $SULO    
8.2 Cleaning all parts of the
~ The motor block|9, the power cable
~ The blades of the blade insert|7 are
~ For manual cleaning, the water should
WARNING! Risk of material damage!
~ Do not use any astringent or abrasive
~ All parts except for the motor block|9
1. If necessary, disconnect the mains
2. Remove the blender jug|5 from the mo-
The motor block|9 must not be im-
mersed in water.
3. If necessary, wipe down the motor
4. Clean the other parts of the device with
5. Allow all parts to dry completely before
52 GB
Downloaded from www.Manualslib.com
device
DANGER! Risk of electric shock!
and the mains plug|10 must not be im-
mersed in water or any other liquids.
DANGER! Risk of injury from
cutting!
sharp. Please be very careful when han-
dling them.
be sufficiently clear so that you can see
the blade insert|7 easily.
cleaning agents.
are dishwasher-safe up to 70 °C.
plug|10 from the wall socket.
tor block|9.
block|9 and the power cable|10 with
a damp cloth. Ensure that the motor
block|9 is completely dry before the
next time it is used.
detergent and warm water. The following
parts are dishwasher-safe up to 70 °C:
- blender jug|5
- lid|3
- measuring jug|2
- food pusher|1
you put them away or use the device
again.
manuals search engine
Some cleaning tips
• Clean the device as soon as possible af-
ter use in order to prevent food rem-
nants from drying on.
• After processing very salty or acidic
types of food, you should immediately
rinse the blender jug|5 thoroughly.

9. Storage

DANGER for children! Keep the
device out of the reach of children.
DANGER! In order to avoid acci-
dents, the mains plug|10 must never
be connected to a wall socket while
in storage.
• Assemble the jug blender for storage
purposes.
• Select a location where neither high
temperatures nor moisture can affect the
device.