Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning; Cleaning The Mixer - Silvercrest SSM 550 B1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SSM 550 B1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 43
Note
These recipes are provided subject to change. All
ingredients and preparation information are guiding
values. Expand these recipe suggestions based on
your personal experiences.
Note
For cases of lactose intolerance, we recommend
you use a lactose-free milk. Keep in mind, however,
that lactose-free milk is a little sweeter.

Cleaning

Caution!
Before starting to clean the liquidiser and its
components:
• Ensure that the motor is switched off and the
power plug removed from the socket.
Under no circumstance may the motor block
be submersed in water or other fluids.This
u
could result in you receiving a fatal electric
shock and the appliance could be damaged.
• Never open the housing of the appliance. This
brings with it the risk of receiving a fatal electric
shock.
• Never disassemble the cutters
ach into the mixer jug
e
mely sharp!
• Do not use solvents or abrasive cleaners on the
plastic surfaces, they could be damaged by them.

Cleaning the mixer

So that you do not injure yourself on the cutters
r
, clean the mixer jug
handled dishwasher brush.
In a case of stubborn soiling, the mixer jug
can also be cleaned in a dishwasher. For this,
always take the mixing jug
described later.
All manuals and user guides at all-guides.com
and never re-
r
. The cutters
r
are extre-
e
only with a long
e
apart, as
e
Clean the lid
and the filling cap
w
washer or with the normal washing up.
If you clean the liquidiser directly after use, you can
often achieve a satisfactory and hygienic level of
cleaning with the following alternative:
Fill the mixer jug
e
and place the mixer jug
block
.
u
Insert the power plug into the wall socket and
activate the Ice Crush/Clean switch, causing the
cutters
r
to rotate in the water with maximum
revolutions.
Should this not dislodge the soiling, you can separate
the lower plastic part of the mixer jug
ters
) from the the glass part:
r
Remove the mixer jug
block
.
u
Turn the plastic element
ment
e
anti-clockwise, such that it allows itself to
be released from the glass element
Attention!
Take care with the cutters
Risk of injury!
- 37 -
in a dish-
q
with water, close the lid
w
on the motor
e
(with the cut-
e
from the motor
e
of the mixer attach-
.
. They are very sharp.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis