General Information; Safety Instructions - Baumer BE134 Betriebsanleitung

BE134
Explanation of symbols ➜ This symbol indicates activities to be carried out.
20

General Information

In the following you will find the explanations of the symbols used in
this operating manual.
● This symbol indicates supplementary technical information.
This symbol is located before texts to which particular attention is to
be paid to ensure proper use of the product.
This symbol is located before texts that provide important additional
information
Italics To help you quickly locate information, important terms are printed in
italics in the left text column.

1 Safety instructions

General information
The products has been developed and built in accordance with the
recognized rules of technology. The units have left the manufacturing
plant ready to operate and in safe condition.
To keep the units in this condition, it is necessary that the units be
- installed and operated
- properly,
- in a safety and hazard-conscious manner,
under observance of this operating manual and in particular of these
safety precautions!
Make sure that the personnel has read and understood the operating
manual, and in particular the „Safety Instructions" chapter.
In addition to the operating manual, the generally applicable legal and
other binding regulations for accident prevention and environmental
protection must be observed and ensured.
This manual is intended as a supplement to already existing docu-
mentation (catalogues, data sheets or assembly instructions).
Proper use
The application of the units consists of controlling and monitoring
industrial processes in the metal, wood, plastics, paper, glass and
textile industry etc.
The units may only be operated
- in the properly installed state and
- in accordance with the specifications of the technical data
www.baumer.com