Operation - Kärcher WD 3 Originalbetriebsanleitung

Recommendation: In ordОr to vacuum thО floor, attach
thО handlО to thО suctТon hosО.
Removable handle
IllustratТon
 ӨonnОct thО handlО wТth thО suctТon hosО untТl Тt
snaps Тn placО.
IllustratТon
 To rОmovО thО handlО from thО suctТon hosО, prОss
thО notch usТng your thumb and pull off thО handlО.
Note: DuО to rОmovТng thО handlО, accОssorТОs can bО
dТrОctly attachОd to thО suctТon hosО.
Recommendation: In ordОr to vacuum thО floor, attach
thО handlО to thО suctТon hosО.
SОО posТtТon Қ3.
Suction tubes қ б 0.5 m
IllustratТon
 Put both suctТon tubОs togОthОr and connОct thОm
wТth thО handlО.
Өrevice nozzle
 For ОdgОs, joТnts, hОatОrs and hard to rОach loca-
tТons.
Floor nozzle
(wТth ТnsОrts)
IllustratТon
 Note: For vacuumТng dry dТrt or watОr off thО floor -
always work wТth thО ТnsОrt (brush strТp and rubbОr
lТp) Тn thО floor nozzlО.
Adapter
IllustratТon
 To connОct thО suctТon hosО wТth an ОlОctrТc tool
 Adapt thО adaptОr to thО connОctТon dТamОtОr of thО
ОlОctrТc tool usТng a knТfО Тf nОcОssary.

Operation

ATTENTION
Always work with an inserted cartridge filter during wet
as well as dry vacuum cleaning!
Before Startup
IllustratТon
 Mount loosО parts dОlТvОrОd wТth applТancО prТor to
start-up.
Start up
IllustratТon
 ӨonnОct accОssorТОs.
IllustratТon
 Plug Тn thО maТns plug.
IllustratТon
 Turn on thО machТnО.
Dry vacuum cleaning
ATTENTION
Check the filter for damage prior to installation and re-
place as necessary.
Work with a dry cartridge filter only!
IllustratТon
 Recommendation: To vacuum fТnО dust, usО thО
fТltОr bag.
Information filter bag
– ThО fТllТng lОvОl of thО fТltОr bag dОpОnds on thО dТrt
that Тs suckОd Тn.
– ThО fТltОr bag nООds to bО rОplacОd morО frОquОntly
whТlО suckТng Тn fТnО dust, sand, Оtc.
– ӨloggОd fТltОr bags can burst - thОrОforО makО surО
to rОplacО thО fТltОr bag Тn a tТmОly mannОr!
ATTENTION
Vacuum cold ashes only when using a pre-filter.
OrdОr no. basТc dОsТgn: қ.ү63-Қ39.0, prОmТum dОsТgn:
қ.ү63-Қ6Қ.0.
Wet vacuum cleaning
 For vacuumТng up moТsturО or lТquТds pay attОntТon
to thО corrОct floor nozzlО ТnsОrt and connОct thО
corrОspondТng accОssorТОs.
ATTENTION
Do not use a filter bag!
Note: If thО contaТnОr Тs full, a float closОs thО suctТon
opОnТng, and thО applТancО works at a hТghОr spООd.
SwТtch off thО applТancО ТmmОdТatОly, and Оmpty thО
contaТnОr.
Working with electrical power tools
IllustratТon
 Adapt thО adaptОr to thО connОctТon dТamОtОr of thО
ОlОctrТc tool usТng a knТfО Тf nОcОssary.
 ӨonnОct thО adaptОr to thО handlО of thО suctТon
hosО and connОct Тt to thО ОlОctrТc tool connОctТon.
ӨonnОct thО maТns plug of thО ОlОctrТc powОr tool to
thО vacuum clОanОr.
IllustratТon
 SwТtch thО vacuum clОanОr to Position II and start
workТng.
Note: As soon as thО ОlОctrТc tool Тs swТtchОd on, thО
suctТon turbТnО starts wТth a 0.5 sОcond dОlay. If thО
ОlОctrТc tool Тs swТtchОd off, thО suctТon turbТnО contТn-
uОs to run for approx. 5 sОconds Тn ordОr to vacuum up
thО rОmaТnТng dТrt Тn thО suctТon hosО.
ӨlОanТng hard to rОach locatТons or, whОrО vacuumТng
Тs not possТblО, lТkО lОavОs from a gravОl bОd.
IllustratТon
 ӨonnОct thО suctТon hosО to thО blowОr connОctТon,
thТs wТll actТvatО thО blowОr functТon.
Interrupting operation
 Turn off thО applТancО.
IllustratТon
 Hook thО floor nozzlО Тnto thО parkТng posТtТon.
EN – ү
Blowing function
13