Sony PCGA-BM1 Bedienungsanleitung Seite 41

Symptom
Dial-up connection can
be established, but
correct communication
is not carried out.
(BLUETOOTH
indicator flashes but
MODEM indicator is
out.)
Data transfer speed is
slow.
A message appears
indicating that all
devices are connected,
that error 6 (invalid
handle) occurred.
Cause/Remedy
c A wrong telephone number may be used. Open the
Properties dialog box of the dial-up connection of the
notebook and check the telephone number. If a prefix is
necessary to dial an outside line, make sure that the prefix
(usually 0) is specified. For details, refer to the manuals
provided with your Sony notebook.
c The dialling method (tone or pulse dialling) may have been
specified incorrectly. Open the Properties dialog box of the
dial-up connection of the notebook and check the dialling
method setting. For details, refer to the manuals provided
with your Sony notebook.
c The data transfer rate varies, depending on distance and
obstacles between devices, interference, operating system,
software application, etc. Change the installation location
of PCGA-BM1 or otherwise decrease the distance between
devices.
c This message appears if the link between the PCGA-BM1
and the notebook was cut by terminating Bluetooth
communications without terminating the dial-up
connection at the notebook. Click the "Redial" button
shown on the message to establish the dial-up link again.
GB
41