Sony PCGA-BM1 Bedienungsanleitung Seite 27

3
Activate Bluetooth communication on the notebook and
establish a link to the PCGA-BM1.
For details, refer to the manuals provided with your Sony notebook.
4
Click the "Start" button and go to "Programs", then "Modem
Station Utility", and click "Modem Station Utility".
The "Destination" dialog box appears.
5
From the "Communication Port" list box, select the port
assigned to Bluetooth communications, and click the "OK"
button.
If you are not sure about the communications port, refer to the manuals
provided with your Sony notebook.
Clicking the "OK" button starts the modem station utility.
6
Click the "Bonded Devices" tab.
Device addresses are shown in the "Bonded Devices List".
The device address of bonded notebooks can be checked on the
respective computer.
For the notebooks PCG-SR31K, PCG-C1VFK etc., the BlueSpace
software can be used to check the device address. Open the "Bluetooth
Setup" dialog box. The device address is shown under the "Properties"
tab.
7
From the "Bonded Devices List", select the device you want
to delete, and click the "Delete" button.
A confirmation message for the deletion appears.
8
Click the "OK" button to close the message.
A message indicating the result of the deletion procedure appears.
9
Click the "OK" button to close the message.
10
Click the "OK" button to quit the modem station utility.
11
Terminate Bluetooth communications.
For details, refer to the manuals provided with your Sony notebook.
Continued on next page
GB
27