Communication; To Terminate Communication - Sony PCGA-BM1 Bedienungsanleitung

Communication

To use the PCGA-BM1 to establish a dial-up connection, proceed as
follows:
Notes
• Before using the PCGA-BM1 for dial-up access, the preparations described in the
previous section (starting on page 19) must be completed.
• The notebook must have been set up for dial-up access. For details on how to set up
dial-up access, refer to the manuals provided with your Sony notebook and to the
documentation of the ISP.
1
Set the DIP switch 1 (setup/normal operation mode selector)
on the bottom panel of the unit to OFF and the DIP switch 3
(private ON/OFF selector) to OFF.
2
Turn on the power of the PCGA-BM1.
3
Activate Bluetooth communications on the notebook and
establish a link to the PCGA-BM1.
For details, refer to the manuals provided with your Sony notebook.
4
Execute a dial-up connection at the notebook.
On the modem selection dialog box, select "PCGA-BM1 (Modem)".
When the dial-up connection has been established, the MODEM
indicator lights up and stays lit until the connection is terminated.

To terminate communication

To terminate communication between the PCGA-BM1 and the notebook,
hang up the dial-up connection at the notebook and then terminate
Bluetooth communication. For details, refer to the manuals provided with
your Sony notebook.
GB
23