Dip Switch Settings - Sony PCGA-BM1 Bedienungsanleitung

DIP Switch Settings

The DIP switches serve to set up the operation mode of the unit. When
installing the PCGA-BM1, make the required settings. When you make
changes later, the DIP switch settings will also have to be changed.
To change DIP switch settings, the power of the unit should be turned off.
1
If the unit is on, turn the power off.
2
Remove the base to gain access to the DIP switches on the
bottom.
1
Factory default settings
Set the DIP switches using the information on the next page.
GB
16
Switch 1 (Setup/normal operation mode selector)
Switch 2 (Always set to OFF in Europe)
Switch 3 (Private ON/OFF selector)
OFF
ON
2 3
ON
r