Sony PCGA-BM1 Bedienungsanleitung Seite 29

5
From the "Communication Port" list box, select the port
assigned to Bluetooth communications, and click the "OK"
button.
If you are not sure about the communications port, refer to the manuals
provided with your Sony notebook.
Clicking the "OK" button starts the modem station utility.
6
Click the "Device Name" tab.
7
Click the "Change" button.
8
Enter the new device name.
The maximum length of the device name is 20 alphanumeric
characters.
9
Click the "OK" button to close the device name change
dialog box.
A message indicating the result of the name change procedure appears.
10
Click the "OK" button to close the message.
11
Click the "OK" button to quit the modem station utility.
12
Terminate Bluetooth communications.
For details, refer to the manuals provided with your Sony notebook.
13
Turn off the power of the PCGA-BM1 and set the DIP switch
1 (setup/normal operation mode selector) on the bottom
panel of the unit to OFF and the DIP switch 3 (private ON/
OFF selector) to ON.
The device name change becomes valid when you turn on the power of the
PCGA-BM1 again.
Continued on next page
GB
29