Sony PCGA-BM1 Bedienungsanleitung Seite 21

4
Check the communications port allocated to Bluetooth
communications.
5
Click the "Start" button and move the pointer to "Programs",
then "Modem Station Utility" and click "Modem Station
Country Selector" to start the Country Selector.
The Modem Station Country Selector dialog box appears. The modem
connected to the default COM4 port is detected, and the current
country code setting is shown in the Current Country field.
6
If the number shown in the Com Port field does not match
the current port, click V and select the number allocated with
BlueSpace or other software.
If the number is correct, proceed to step 7.
Note
If the message "Modem answer error. Please try another port or check modem."
appears, the wrong COM port was chosen. Select the correct port.
7
If the country shown in the Current Country field is not
correct, select the country in the Available Country field.
If the country is correct, proceed to step 8.
8
Click the "Select" button.
The country code change process starts.
When the process is completed, the message "Modem station country
selection is OK" is shown.
9
When you are happy with the content of the Current Country
field, click the "Cancel" button to close the Country Selector.
This completes the country code selection process.
Continued on next page
GB
21