Resetting The Unit To The Factory Defaults - Sony PCGA-BM1 Bedienungsanleitung

Resetting the unit to the factory defaults

You can return the unit to the factory default settings (bonded notebook
information and Passkey string). This is useful if you have forgotten a
changed Passkey or want to delete all bonded notebooks in one operation.
Note
Any changes made to the device name will not be affected by the reset operation.
1
Remove the base.
2
Turn on the power of the unit.
3
Push the reset switch with a paper clip or other pointed
object until all indicators light up.
Reset switch
Note
To prevent the possibility of unit damage, do not push the reset switch with the tip of
a pencil or other object that may break.
4
Turn off the power of the unit.
The reset becomes valid when you turn on the power of the PCGA-BM1
again.
GB
30
LIN
CLEAR