Connections Via Bluetooth; Object Mode - Kettler CTR 10 - 07863-200 Anleitung

CONNECTIONS VIA BLUETOOTH

For the connection with chest strap, tablet or PC.
Establish connection to the chest strap
Using a chest strap, you can connect the KETTLER training computer to a heart frequency monitor
that supports Bluetooth ® low energy technology. The connection is set up via the Start Menu
> Device Installations > Bluetooth Setup. In Bluetooth Setup, Bluetooth must be activated in the
top bar. In addition, select 'Chest strap' in the line below as active mode. In the third line, you
can select and couple the chest strap. When selecting this line, you will enter a list with already
connected and available chest straps. Available chest straps are highlighted in blue. Here, you
need to select the desired chest strap and connect it in the following context menu. If several users
with different chest straps are training on the training equipment, the applicable chest strap must
always be activated with the procedure described above.
Note: The sports device can only be connected to chest straps that support Bluetooth. When
choosing a chest strap, make sure that it supports Bluetooth low energy technology. Chest
straps with 5kHz technology (e.g. polar T34) cannot be connected.
Establish a connection with smartphone, tablet or computer
The KETTLER sports device can be connected to smartphones, tablets and PC via Bluetooth v4.0,
making training possible with numerous APPs or the PC software KETTLER WORLD TOURS. The
connection is set up via the Start Menu > Device Installations > Bluetooth Setup. In Bluetooth
Setup, Bluetooth must be activated in the top bar. In addition, select 'APP / PC' in the line below
as active mode. In the third line, the device name of your KETTLER fitness equipment will appear.
When selecting the name, you can edit it. The next stage of linking now takes place in the Blue-
tooth Setup of the device you would like to connect. If a smartphone, tablet or PC is coupled, the
training screen of the device is displayed with reduced functionality.

OBJECT MODE

Customized software version for the use in public gyms.
If you want to place the Kettler fitness equipment in a publicly accessible gym, we recommend to
activate the object mode. This reduces the functionality and the training modes to all types which
make sense when using the equipment once (e.g. as hotel guest). In addition, setting menus are
disabled so that nothing can be changed. In the object mode, no personal data and training
results can be saved.
Enable the object mode in the Start menu in Device settings. You are required to press all three
buttons at once. By pressing the same button sequence, you will return to normal mode, if
required.
FURTHER FUNCTIONS
ENGLISH 21
| KETTLER