Mounting Of The Battery Plate - Panasonic AG-CA300 Bedienungsanleitung

Mounting of the Battery Plate

When using a battery, mount the included battery plate to the rear panel of the unit.
1
Remove the 2 screws and remove the rear
panel cover. Also remove the 4 screws from
the main body.
2
Connect the battery connector of the unit to
the connector on the included battery plate.
3
Mount the battery plate securely using the 4
screws removed from the main body in
making sure there is no slack.
E-17
<Note>
The battery may fall off if the screws are
loose.
4
Cover for the rear panel removed in
mounted on the front panel so it will not get
lost. Mount the cover for the rear panel
removed in
using the 2 screws.
1
,
1
as shown in the illustration
1
can be