Items Supplied; Before Using For The First Time - Silvercrest SECM 12 A1 Bedienungsanleitung

BB&3( B%ERRN 6HLWH  0RQWDJ  1RYHPEHU    
WARNING! Risk of material
damage
~ The bowl must be completely dry before
~ Do not heat the bowl in excess of 40|°C.
~ Hard or sharp objects (e.g. metal
~ Switch the ice-cream maker on first and
~ While making ice cream do not switch
~ Never place the appliance on hot sur-
~ Only use genuine accessories.
~ The appliance is fitted with non-slip sili-
~ Do not use harsh or abrasive cleaning
~ All appliance accessories should be
~ Should liquid leak from the housing of
~ The appliance includes protection from
18 GB
Downloaded from www.Manualslib.com
being put into the freezer.
spoons) may damage the inside of the
bowl. Only ever use rubber scrapers or
wooden utensils when taking out the ice
cream you have made.
only add the mix you have prepared to
the machine when running.
the ice-cream maker off and then back
on. The ice cream mix would otherwise
freeze to the bowl and block the mixing
blade.
faces (e.g. a hob) or near sources of
heat or naked flame.
cone feet. As furniture is coated with vari-
ous varnishes and plastics and may be
treated with different cleaning products, it
cannot be completely ruled out that some
of these substances contain components
which may attack and soften the silicone
feet. If necessary, place a non-slip mat un-
derneath the appliance.
agents.
cleaned by hand. (The mixing blade|5
can also be cleaned in the dishwasher.)
the bowl, the bowl must be discarded.
Although this liquid is not toxic, it is un-
suitable for consumption.
overheating. This will switch the appli-
ance off to prevent the motor overheat-
ing. In this case unplug and wait until
the motor has cooled down, at least for
15 minutes.
manuals search engine

4. Items supplied

1 motor unit|2
1 lid|3
1 bowl|6
1 ring|7
1 container|8
1 mixing blade|5
1 connecting piece|4
1 operating instructions
5. Before using for the
first time
DANGER!
Risk of electrocution!
The motor unit|2 must not be im-
mersed in water.
NOTE: When being used for the first time,
the appliance may give off an odour. This is
due to the design of the appliance and is
perfectly normal. Ensure sufficient ventila-
tion in the room.
1. Remove all parts from the packaging.
2. Check that all parts are complete and
intact.
3. Wipe off the motor unit|2 with a slight-
ly damp cloth.
4. Wipe out the inside of the bowl|6 with
a damp cloth.
5. Rinse all other parts thoroughly in
warm water.
6. Dry all parts well.