C.M.A. Astoria AL Bedienungs- Und Wartungsanleitung Seite 37

COFFE DISPENSING
Put the coffee cup under the
dispensing spout
Press the wanted dose but-
ton, for example
wait for the coffee to be dis-
pensed (led switching on);
to block the dispensing of
coffee in advance, press but-
ton again or button
in case of anomalies or block-
ing of the push/button panel,
use the manual switch (see
AEP version).
Do not remove the filter-holder from the delivery group during
coffee dispensing
6.8.3 AEP version
Put the coffee cup under the
dispensing spout
Press the desired delivery
switch. The delivery will begin,
and it can be stopped using
the same switch once the
desired amount of coffee is
obtained in the cup.
USER manual
and
PROG.
STOP
PROG.
;
STOP
6.8.4 SAE version
PROGRAMMING
The machine is programmed
by default. Should the coffee
doses need to be modified, pro-
ceed as follows:
Always programme the right
hand push-button panel first.
In this way all push-button
panels get automatically pro-
grammed. If necessary, sub-
sequently programme the
others;
position to ON programming
lever X (see note * on next
page) located under the right-
hand body front panel;
position the cup under the
dispensing spout;
PROG.
press button for at least
STOP
5 seconds, until all leds of the
dose buttons are lit;
press the wanted dose button, for example
to confirm the dose, press
PROG.
button ;
STOP
repeat this operation for the
other dose buttons;
on completing the program-
ming, return the program-
ming lever X (see note * on
next page) to the OFF posi-
tion.
Programming of every dose must be carried out with ground coffee
and not with previously used coffee dregs.
PROG.
STOP
PROG.
STOP
;
PROG.
STOP
37 160
of