Test Procedure; Customer Diagnostics - Sirona Cerec AC Handbuch

Sirona Dental Systems GmbH
Diagnostic Tool CEREC AC
63 24 599 D3492
D3492.076.03.01.02 03.2011
3. Insert the diagnostic tool CD in the drive and select "CD/DVD:..." in
the menu using the arrow keys.
The PC boots from the CD.
4. Wait until the light on the drive goes out.
5. Confirm your selection by pressing the "Return" key on the key-
board.
The diagnostic tool starts and a selection menu appears.
Tip: The "Customer Diagnostics" will start automatically af-
ter one minute if you did not press an arrow key beforehand.
6. Select the test with the arrow keys.
7. Confirm your selection by pressing the "Return" key on the key-
board.
The test starts.
5.2

Test procedure

5.2.1

Customer Diagnostics

✔
You have started the "Customer Diagnostics" test and the sys-
tem configuration is displayed.
PC diagnostic tool
Test procedure
9