Setting The Display Brightness; Setting The Display Mode; Setting The Volume - Palazzetti Easy Touch Verwendung Und Betrieb

3.3.2 Setting the display brightness

Display brightness when in standby mode can be set.
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu
d) Set the desired brightness (

3.3.3 Setting the display mode

The data shown on the display when this is in standby mode can be set.
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu
d) Set one of the following values using the
"OFF" •
"1" •
"2" •
"3" •
•
"4"
e) Press to confirm the settings.

3.3.4 Setting the volume

The volume of the buzzer can be set based on requirements:
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu [
d) Set the desired volume (OFF, 1 to 5) using the
3.3.5 Improving the combustion
A good combustion depends on several factors (type of installation, operation and maintenance conditions, type
of pellet etc ..)
If at the end of combustion in the brazier are many waste, it is advisable to change the combustion configurations
(increasing the value) to find the most satisfactory solution.
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu
d) Set one of the following values using the
"1"
"2"
"3"
e) Press to confirm the settings.
22
to go to the setup menu
OFF, 1 ... 5
to go to the setup menu
The display remains on the last operation set by the user;
All operating parameters are displayed cyclically;
The room probe temperature is shown
The current time is shown
The operating autonomy in hours before having to refill the hopper is shown, If the function
"filling" has been activated.
to go to the setup menu
to go to the setup menu
and then press
to confirm;
[11]
and press
) using the buttons and press
and then press
to confirm;
[12]
and press
and buttons:
and then press
to confirm;
1 3
] and press
buttons and press
and then press
to confirm;
[ 1 4]
and press
and buttons:
;
to confirm;
to confirm.
;
to confirm;
;
to confirm;
to confirm.
;
to confirm;