Description Of The Menus; Using The Control Panel - Palazzetti Easy Touch Verwendung Und Betrieb

2.1.2 Description of the menus

ICON FUNCTION
Power
Fan
Temperature
Fuel
Timer
ICON FUNCTION
[1]
[2]
[3]
[4]
[5]
[6]
[7]
Setup
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[30]
[40]
[3 0] [4 0]
Submenus and

2.2 USING THE CONTROL PANEL

• The arrow buttons
• When selecting a given function, simply press the
buttons.
• Pressing the
• In general all values that are flashing can be modified using the
• The "cancel" button
alarm or error codes.
Stove output setting
It allows you to set the fan speed.
Displays the room temperature reading and is used to set the desired
temperature.
Not used
Enables or disables the timer. When enabled, the icon
displayed steady (not flashing)
SUBMENU
Assigns the programs (max 3) to the different days of the
Weekly timer
week
Programs Program setting menu
Time / date Time and date setting
Displays the number of hours remaining until recommended
Hours remaining maintenance. When "Hi" is displayed, the remaining time
exceeds 999 hours.
System
Displays the current software version
information
Function not enabled
Enables or disables Eco Mode, in which the stove
Eco function automatically switches off and on based on room temperature
(only in configuration 1).
Difference in degrees from room temperature below which
Restart delta
the stove switches on again (only in configuration 1).
Frost protection
Minimum temperature below which the stove switches on
(only in configuration 1).
temperature
Lock keypad Disables the buttons on the keypad
Display brightness Sets display brightness
Display mode Sets how the data is displayed
Buzzer volume Sets the buzzer volume
Combustion Three different types of combustion can be set
Function not enabled
Installer menu Sets/displays the stove configuration
Service menu Menu reserved for the service centre
in the Setup menu are password-protected and reserved for service centre personnel.
are used to scroll between the different menus that are highlighted.
button confirms the setting.
is used to cancel any changes; pressing and holding the button displays any active
DESCRIPTION
DESCRIPTION
button and then modify the values, again using the
VALUES
1..5
c: OFF,1..5; A; Hi
r: ON/OFF
l: ON/OFF
6°C .. 51°C
will be
ON - OFF
VALUES
[d1] ... [d7]
[P1] ... [P6]
OFF; Eco
0,5 ... 5,0°C
OFF; 3 ... 20 °C
OFF; Lo; Hi
OFF; 1 ... 5
OFF; 1 ... 4
OFF; 1 ... 5
PWD: "54"
buttons.
1 ... 3
19