2.3 OPERATING PARAMETERS
Stove operation is determined by the Power level, Fan and Temperature parameters set by the user.
2.3.1 setting the power level
The power level defines the amount of heat produced by the stove and consequently directly affects fuel
consumption.
To change the power level:
a) Use the
b) The power level value will flash; set the value using the
c) Press
to confirm the settings.
2.3.2 Modifying the fan speed
To modify the fan speed:
a) Use the
b) Use the
a) Press the
b) Selecting the central fan [c], change its value with the
• "OFF" = excludes ventilation completely and the heater will only work by natural convection;
• "1" minimum ... "5" maximum;
• "A" = automatic operation (the heater will set the speed according to the ambient temperature;
• "Hi" = ultra-fast operation (to be used only if there is a need to heat an environment quickly);
c) Press the
If the right [r] or left [L] rear fans are selected, you can only set the values o f ON and OFF.
In the event that the central fan was set to OFF and at least one of the two rear fans is ON, the central fan will
automatically set itself to the minimum setting.
2.3.3 Setting the room temperature
Setting this value defines the desired room temperature, read directly by a probe fitted on the stove.
To set the desired temperature:
a) Use the
b) The current value will flash; change it using the
c) Press
to confirm the settings.
20
buttons to go to the power menu
keys to move through the ventilation menu
keys to move between the central fan [c], the right fan [r] and the left fan [L];
key to select the fan required;
key to confirm the settings.
buttons to go to the temperature menu
and press
;
(buttons (1 minimum,....5 maximum)
and press the
keys:
and press
;
buttons
key;