Herunterladen Inhalt Inhalt Diese Seite drucken

Daily Use; Setting And Starting A Programme - Electrolux ESF 6610ROW Benutzerinformation

Vorschau ausblenden Andere Handbücher für ESF 6610ROW:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to 'Set-
ting and starting a programme'.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
7.1 Using the detergent
A
7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
• You have not closed the door to start
the programme.
• The programme is completed.
Setting mode
For some settings it is necessary that the
appliance is in setting mode.
The appliance is in setting mode when,
after the activation, the indicator and the
duration of the programme ECO are on.
If the control panel does not show this
condition, press and hold, at the same
time, Program and TimeSaver until the
indicator and the duration of the pro-
gramme ECO come on.
B
30
A
20
+
-
C
3. Load the baskets.
4. Add the detergent.
• If you use the combi detergent tab-
lets, activate the Multitab option.
5. Set and start the correct programme
for the type of load and the degree of
soil.
1.
Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compartment
(A) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode.
3. To set a programme, keep the appli-
ance door ajar.
4. Set a programme. Press Program
again and again until the indicator of
the programme you want to set
comes on. You can also set the appli-
cable options.
• If you want to set the MyFavourite
programme, press and hold Pro-
gram until the indicators that are re-
lated to the MyFavourite programme
and options come on.
The display shows the duration of the
programme.
5. Close the appliance door to start the
programme.
• The washing phase indicator comes
on.
ENGLISH
29

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Esf 6610rox

Inhaltsverzeichnis